Checklist for thread breaking with a number of additions:
1) Quality thread? Not too old? Not material (Rayon could be a stunning thread, however it takes light treatment and will break frequently).
2) Check your needle for snags, sized suitably, etc. Some threads do higher with a prime sew or metallike needle. typically you’ll get a bum needle. however typically the larger eye of a topstitch needle will cause sloppy sew formation.
3) Check your sew plate wherever the thread goes into the machine to create a sew. Any snags or rough spots? Since you are going all told directions, the thread will contact a rough spot that hadn’t been a problem with regular handicraft.
4) Is it directional? solely happen as you sew backwards? Happens to ME typically. The needle will really pierce the operating thread (thread takes several passes through the machine before it’s finally created into one sew, piercing it’ll break that operating thread pretty quickly. attempt to limit what proportion you sew directly backwards, particularly as that is wherever the needle is most at risk of flexing.
5) Thicker, rougher threads, even some quality cottons will be ‘grabby’ and shred if there is a heap of sewing on prime of sewing (backtracking or very dense designs).
6) typically it will be a temporal arrangement issue- if the highest thread looks to be obtaining split and elements square measure worked into a number of totally different stitches whereas a ply is not obtaining sewed. The hook is cacophonic the thread as it’s being fashioned. Tends to happen on thicker threads or lower ply thread (2 ply vs. 3 ply).
7) Check the higher thread path. typically a slippery thread will flip itself around one thing as you sew, work itself out of the take up lever, etc.
8) square measure you furthermore might having tension issues? A too tight prime tension will typically cause the thread to interrupt.
9) Check your reel case for nicks, scratches, rough spots too. the highest thread should pass round the case so as to create a sew, thus it’s ought to be swish and uninjured.
10) Check however the thread is moving from the spool.
If it’s a straight-wound spool, it’s going to not just like the additional twist it’s being given by spooling the thread off the highest.
If it’s a slippery thread, it’s going to be obtaining tangled round the spool pin and/or like a thread web.
I conjointly need to incorporate a number of additional tips gleaned from performing at my Janome dealer’s look part-time.
Make sure you’re victimization the right reel for your machine!
You would be surprised at what percentage machines we tend to see whose main issue is that the wrong reel! it is simple to grab the incorrect bobbin, particularly at a big-box store’s stitching section or if you have got had multiple machines. The machines could progress, however the accessories and bobbins tend to remain.
I conjointly suggest obtaining real bobbins from your machine’s manufacturer.
Ask your dealer if the bobbins you’re being sold-out for your machine came from the manufacturer or if they’re generics that suit your machine. There square measure generic bobbins out there with constant dimensions (or “close-enough”), however I continuously have less hassle with my Janome bobbins in my Janome machine.
I conjointly like shopping for the coloured bobbins from Janome thus I will separate the thread typewritten in my bobbins. I recently got blue bobbins and that they even have pink ones. Take it from ME, I obtain generic everything most of the time, however not bobbins.
Don’t forget to lift your presser foot once threading your machine, in order that the thread slides into the stress disks properly.
I conjointly raise my presser foot 1st once I am ever-changing my prime tension.